NEW YORK – Aguilar has introduced the DB 700, a 700-watt hybrid bass amplifier that brings the high-voltage, tube-driven preamp architecture of its flagship DB 751 into a compact 11.2-pound chassis. Priced at $2,499.99 USD, the rack-mountable bass head is available through authorized Aguilar dealers.
Designed for touring, recording and practice, the Aguilar DB 700 combines two 12AX7 preamp tubes with a Class D power stage. It also adds cabinet impulse response loading, dual XLR outputs and universal mains compatibility.
DB 751-Inspired Tube Preamp and 700-Watt Output
At the center of the DB 700 is a high-voltage tube preamp based on the architecture of the Aguilar DB 751. According to the manufacturer, the two 12AX7 tubes are intended to retain the harmonic richness and tonal detail associated with the company’s flagship amplifier.
The Class D power section delivers 700 watts of continuous output into a minimum load of 2.67 ohms. Two Speakon speaker outputs provide compatibility with a range of bass cabinet configurations while maintaining substantial clean headroom.
Three-Band EQ With Bright and Deep Controls
The front panel is organized around Input Gain and Master Volume controls, alongside a three-band EQ for Bass, Mid and Treble.
A Bright switch provides a broadband boost to the upper frequencies, while the Deep switch reinforces the low end. Aguilar characterizes the resulting sound as having deep lows, rich mids and crisp but smooth highs.
Cabinet IR Loading and Dual XLR Outputs
The Aguilar DB 700 includes digital cabinet simulation through the Aguilar Cabinet Suite. Connected through USB-C, the software allows musicians to load impulse responses from Aguilar’s SL and DB cabinet ranges or import their own IR files.
The cabinet-simulated signal can be routed through one of the amplifier’s two XLR outputs and sent directly to a front-of-house system or recording console. This provides a consistent direct signal without requiring a physical microphone in front of a bass cabinet.
The XLR section also includes ground-lift and pre/post-EQ switching. Additional rear-panel connections include a series effects loop with Send and Return jacks and a dedicated tuner output.
Connections for Silent Practice and Recording
For silent practice, the DB 700 provides an auxiliary input, a headphone output and a dedicated Headphone Mix control. The mix control allows external audio from a playback device to be blended with the bass signal.
These connections expand the amplifier’s role beyond live performance, allowing it to function as a practice and recording system without a connected speaker cabinet.
Rack-Mountable Design and Universal Power
The Aguilar DB 700 measures 15.5 x 11.35 x 3.5 inches and weighs 11.2 pounds. Its chassis is fully rack-mountable, and Aguilar includes the required rack ears with each unit for installation in touring racks and flight cases.
A universal 100-240V power supply supports international touring. Musicians can use the amplifier in different regions by changing the appropriate power cable rather than using a separate voltage converter.
Aguilar says the amplifier was developed around the question, “What do bassists need and is there a tool for that need?” The resulting design combines the company’s established tube-driven DB sound with a lighter Class D power section and updated digital routing.
Aguilar DB 700 Price and Availability
The Aguilar DB 700 is available through authorized Aguilar dealers at a street price of $2,499.99 USD.
Further information is available from the official Aguilar Amplification website.






